Atomizer resistance: 2.1 – 2.4 ohms – standard
Clearomizer Capacity: 1.6ml
Top coil atomiser system
Easy to clean
Colour:Mixed color(see pictures)
For:510, eGo, eGo-T, Riva-T, eGo-C and so on battery.
Advantages of CE4 Clearomizer
1: Very easy to refill – no syringe necessary, also you can control how much to fill through the clear shell. We advise never filling to more than about 95% capacity.
2: Works with most batteries – the CE4 clearomizer is with 510 thread, so it can work with most of the batteries on the market. Such as the eGO / 510 batteries and the new lavatube adapter.
How to Use
Simply unscrew the top, tilt the unit and pour the liquid (needle bottle or syringe is ideal) into the side of the unit avoiding the middle and fill. Then gently screw the top back on. Ensure the entire wick has been drenched in liquid .It’s good to keep tilting the unit and pouring liquid onto the wick to get better flavour.
How to Refill E liquid:
Refill clearomizer CE4 – It’s very easy to refill the CE4 clearomizer, – follow the steps below:
Unscrew the drip-tip from the clearomizer
Fill with e-liquid – Never fill to more than about 95% capacity.
DO NOT pour the e-liquid into the center hole, please drip the e-liquid down against the wall of the clearomizer , slowly.
Screw the drop tip back.
Wait 1-2 minutes for the e-liquid to feed down into the coil.
Wash all the components in warm water, the best way to clean the wick is to fill the unit half way with warm water, put the top on then shake vigorously, this method can be repeated 3-4 times until you can see the wicks colour change as close to white as possible. Leave to dry. When all the components are re-assembled, it is a good idea to push the on button a few times until you see a little vapour rise from the clearmiser top. This will burn off any residue. Then it is ready to re-use.